¡¡ Home       About us        Products        Certificate       Feed back       Contact us
¡¡ ¡¡ ¡¡
¡¡
¡¡
Electrical Items >> Switching Power Supply >> S-15 Switching Power Supply ¡¡

S-15 Switch Power Supply (Single Way)

  • Low price and high reliability
  • 105¡æ output capacitor
  • AC input power suitable for the world
  • High efficiency and low operation temperature
  • Soft-start current can reduce the AC input impact effectiely
  • With short-circuit and owwerload protection
  • 100% full-load burning test
  • Installed with EMI filter,minimum wave
  • Model

    Performance
    S-15-5 S-15-12 S-15-24
    DC output voltage 5V 12V 24V
    Output voltage error(Note:2) ¡À2% ¡À1% ¡À1%
    Rated output current 3A 1.3A 0.7A
    Output current rage 0-3A 0-1.3A 0-0.7A
    Wave and noise(Note:3) 50mVp-p 50mVp-p 100mVp-p
    Inlet stability(Note:4) ¡À0.5% ¡À0.5% ¡À0.5%
    Load stability(Note:5) ¡À1% ¡À0.5% ¡À0.5%
    DC output power 15W 15.6W 16.8W
    Efficiency 65% 68% 72%
    Adjustable range for DC voltage ¡À10.5% ¡À10% ¡À10%
    Range for input votage 85~132VAC/170~264VACswitch choice
    Input current 0.5A/115V 0.25A/230V
    Impact current Cool-start current15A/115V 30A/230V
    Leakage current <0.5mA/240VAC
    Overload proctection

    105%~150%Model:FOLDBACK:current limit reset:self-reset

    Over-voltage protection ¡­¡­
    High-temperature protection ¡­¡­
    Temperature factor ¡À0.02%¡æ(0~50¡æ)
    Start,rise and lock time 200ms,100ms,30ms
    Vibration resistance 10~500Hz,2G 10min./1cycle,time60,minutes for each shaft
    Resistance to pressure

    Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC

    Insolationg resistance Input and output internal,input and enclosure,Output and enclosure:0500VAC/100M Ohms
    Operating temperature and humidity -10¡æ~+60¡æ£¬20%~90%RH
    Store temperature and humidity -20¡æ~+85¡æ,10%~95%RH
    Overall dimension 99*97*35mm
    Weight 0.3Kgs
    Safety standard Conform to requirement in UL1012(NOT APPLY FOR THE MARK)
    EMC standard Conform to condition CLASS B,FCC PART15 J
    Note:1.The testing condition for the paramenter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
    ¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
    ¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
    ¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
    ¡¡¡¡ 5.Load stability test:The load is from 0% to 100%

    hits£º1743    addtime£º2005-10-21 £Ûback£Ý

    ¡¡
    ¡¡
    ¡¡
    ¡¡
    ¡¡

    TEL:0086-577-27838284  Fax:0086-577-56847980  E-MAIL: sales@eraelectric.com