|
SP-1000 Switching Power Supply |
|
Low price and high reliability
105¡æ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectiely
With short-circuit and owwerload protection
100% full-load burning test
Installed with EMI filter,minimum wave |
 | |
|
Model
Performance |
SP-1000-12 |
SP-1000-15 |
SP-1000-24 |
SP-1000-48 |
|
|
| DC output voltage |
12V |
15V |
24V |
48V |
|
|
| Output voltage error(Note:2) |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
|
|
| Rated output current |
80A |
53A |
33A |
17A |
|
|
| Output current rage |
0-80A |
0-53A |
0-33A |
0-17A |
|
|
| Wave and noise(Note:3) |
120mVp-p |
150mVp-p |
150mVp-p |
240mVp-p |
|
|
| Inlet stability(Note:4) |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
|
|
| Load stability(Note:5) |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
|
|
| DC output power |
1000W |
1000W |
1000W |
1000W |
|
|
| Efficiency |
82% |
84% |
86% |
88% |
|
|
| Adjustable range for DC voltage |
10-13.2V |
12-15V |
20-26.5V |
41-56V |
|
|
| Range for input votage |
186~230VAC,47~63HZ |
| Input current |
7A/115V 3.5A/230V |
| Impact current |
18A/115V 36A/230V |
| Leakage current |
<3.5mA/240VAC |
| Overload proctection |
105%¡«135% TYPE Foldback Cut off output RESET:Self-Reset |
| Over-voltage protection |
13.8~16.2V |
15.5~18.2V |
|
|
|
|
| High-temperature protection |
RTH1 OR RTH2>=50¡æ FAN ON,<=45¡æ FAN OFF,>=70¡æ Cut off output |
| Temperature factor |
¡À0.03%¡æ(0~50¡æ) |
| Start,rise and lock time |
200ms,100ms,30ms |
| Vibration resistance |
10~500Hz,2G 10min./1cycle,time60,minutes for each shaft |
| Resistance to pressure |
Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC |
| Insolationg resistance |
Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms |
| Operating temperature and humidity |
-10¡æ~+50¡æ,20%~90%RH |
| Store temperature and humidity |
-20¡æ~+85¡æ,10%~95%%RH |
| Overall dimension |
280*180*125mm |
| Weight |
6.0Kgs |
| Safety standard |
DESIGN REFER TO UL1950 TUV EN60950 |
| EMC standard |
DESIGN REFER IEC1000-42,3,4,5,6,8,11 IEC100-3-2 |
Note:1.The testing condition for the paramenter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 1.2UF&47UF capacitor short-circuit for interrupting.
¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
¡¡¡¡ 6.C3,4 must be knocked down. | | |
|
