|
Low price and high reliability
105¡æ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectiely
With short-circuit and owwerload protection
100% full-load burning test
Installed with EMI filter,minimum wave |
 | |
|
Model
Performance |
S-200-5 |
S-200-7.5 |
S-200-12 |
S-200-13.5 |
S-200-15 |
S-200-24 |
S-200-27 |
S-200-48 |
| DC output voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Output voltage error(Note:2) |
¡À2% |
¡À2% |
¡À2% |
¡À2% |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
| Rated output current |
40A |
26.7A |
16.7A |
14.9A |
14.3A |
8.4A |
7.5A |
4.2A |
| Output current rage |
0-40A |
0-26.7A |
0-16.7A |
0-14.9A |
0-14.3A |
0-8.4A |
0-7.5A |
0-4.2A |
| Wave and noise(Note:3) |
150mVp-p |
150mVp-p |
180mV |
180mV |
180mV |
180mV |
240mV |
240mV |
| Inlet stability(Note:4) |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
| Load stability(Note:5) |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
| DC output power |
200W |
198.75W |
198W |
198.45W |
198W |
199.2W |
199.8W |
201.6W |
| Efficiency |
71% |
76% |
79% |
80% |
81% |
83% |
83% |
84% |
| Adjustable range for DC voltage |
4.5-5.6V |
6-9V |
10-13.2V |
12-15V |
13.5-18V |
20-26.4V |
26-32V |
41-56V |
| Range for input votage |
90~132VAC,180~264VAC SELECTED BY JUMPER OR SWTCH 47~63Hz;254~370VDC |
| Input current |
4.5A/115V 2.5A/230V |
| Impact current |
30A/115V, 60A/230V |
| Leakage current |
<3.5mA/240VAC |
| Overload proctection |
105%~150% TYPE:PULSING HICCUP SHUTDOWN RESET:Recyclea ON/OFF |
| Over-voltage protection |
5.75-6.75V |
9.4-10.9V |
13.8-16.2V |
15.5-18.2V |
18-21V |
27.6-32.4V |
33.7-39.2V |
57.6-67.2V |
| High-temperature protection |
RTH3>=90¡æ OUTPUT SHUTDOWN |
| Temperature factor |
¡À0.03%¡æ(0~50¡æ) |
| Start,rise and lock time |
200ms,50ms,20ms |
| Vibration resistance |
10~500Hz,2G 10min./1cycle,time60,minutes for each shaft |
| Resistance to pressure |
Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC |
| Insolationg resistance |
Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms |
| Operating temperature and humidity |
-10¡æ~+50¡æ£¬20%~90%RH |
| Store temperature and humidity |
-20¡æ~+85¡æ,10%~95%RH |
| Overall dimension |
150*140*86mm |
| Weight |
0.9Kgs |
| Safety standard |
Meet TOUL1950 |
| EMC standard |
...... |
Note:1.The testing condition for the paramenter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
¡¡¡¡ 6.C3,4 must be knocked down. |
