Low price and high reliability
105¡æ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectiely
With short-circuit and owwerload protection
100% full-load burning test
Installed with EMI filter,minimum wave |
 | |
|
Model
Performance |
S-150-5 |
S-150-7.5 |
S-150-9 |
S-150-12 |
S-150-13.5 |
S-150-15 |
S-150-24 |
S-150-27 |
S-100-48 |
| DC output voltage |
5V |
7.5V |
9V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Output voltage error(Note:2) |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
| Rated output current |
30A |
20A |
16.7A |
12.5A |
11.2A |
10A |
6.5A |
5.6A |
3.2A |
| Output current rage |
0-30A |
0-20A |
0-16.7A |
0-12.5A |
0-11.2A |
0-10A |
0-6.5A |
0-5.6A |
0-3.2A |
| Wave and noise(Note:3) |
150mVp-p |
150mVp-p |
180mV |
180mV |
180mV |
180mV |
240mV |
240mV |
240mV |
| Inlet stability(Note:4) |
¡À0.5% |
¡À0.5% |
¡À0.3% |
¡À0.3% |
¡À0.3% |
¡À0.3% |
¡À0.2% |
¡À0.2% |
¡À0.2% |
| Load stability(Note:5) |
¡À0.5% |
¡À0.5% |
¡À0.3% |
¡À0.3% |
¡À0.3% |
¡À0.3% |
¡À0.2% |
¡À0.2% |
¡À0.2% |
| DC output power |
150W |
150W |
150.3W |
150W |
151.2W |
150W |
156W |
151.2W |
153.6W |
| Efficiency |
78% |
80% |
80% |
82% |
83% |
84% |
85% |
86% |
87% |
| Adjustable range for DC voltage |
4.5-5.5V |
6-8.3V |
8-10.4V |
10.6-13.2V |
12-15V |
13.5-16.5V |
21-28V |
24-30V |
43-53V |
| Range for input votage |
85~132VAC/176~264VAC SELECTED BY JUMPER OR SWTCH 47~63Hz;255~370VDC |
| Input current |
3.2A/115V 1.6A/230V |
| Impact current |
Cool-start current 35A/115V 60A/230V |
| Leakage current |
<3.5mA/240VAC |
| Overload proctection |
105%~150% TYPE:PULSING HICCUP SHUTDOWN RESET£ºreset:self-reset |
| Over-voltage protection |
115%~135% |
| High-temperature protection |
¡¡ |
| Temperature factor |
¡À0.03%¡æ(0~50¡æ) |
| Start,rise and lock time |
100ms,50ms,20ms |
| Vibration resistance |
10~500Hz,2G 10min./1cycle,time60,minutes for each shaft |
| Resistance to pressure |
Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC |
| Insolationg resistance |
Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms |
| Operating temperature and humidity |
-10¡æ~+60¡æ£¬20%~90%RH |
| Store temperature and humidity |
-20¡æ~+85¡æ,10%~95%RH |
| Overall dimension |
199*110*50mm |
| Weight |
0.8Kgs |
| Safety standard |
Meet UL1950,TUV EN60950 |
| EMC standard |
Conform to CISPR22(EN55022),IEC1000-4-2,3,4,5 IEC1000-3-2 |
Note:1.The testing condition for the paramenter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
¡¡¡¡ 5.Load stability test:The load is from 0% to 100%
¡¡¡¡ 6.C2,3,11 must be knocked down. |
