|
Low price and high reliability
105¡æ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectiely
With short-circuit and owwerload protection
100% full-load burning test
Installed with EMI filter,minimum wave |
 | |
|
Model
Performance |
S-145-5 |
S-145-7.5 |
S-145-12 |
S-145-24 |
| DC output voltage |
5V |
7.5V |
12V |
24V |
| Output voltage error(Note:2) |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
| Rated output current |
25A |
18A |
12A |
6A |
| Output current rage |
0-25A(Biggest 30A) |
0-18A(Biggest 18A) |
0-12A(Biggest 14A) |
0-6A(Biggest 7A) |
| Wave and noise(Note:3) |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
| Inlet stability(Note:4) |
¡À0.5% |
¡À0.5% |
¡À0.3% |
¡À0.2% |
| Load stability(Note:5) |
¡À0.5% |
¡À0.5% |
¡À0.3% |
¡À0.2% |
| DC output power |
125W |
135W |
144W |
144W |
| Efficiency |
78% |
80.5% |
80.5% |
83.5% |
| Adjustable range for DC voltage |
4.75-5.5V |
6-8V |
10.8-13.2V |
21-28V |
| Range for input votage |
85~132VAC/180~264VACswitch choice 47~63Hz;255-370VDC |
| Input current |
3.2A/115V 1.6A/230V |
| Impact current |
Cool-start current35A/115V 60A/230V |
| Leakage current |
<15mA/240VAC |
| Overload proctection |
125%~168%
RESERT:RECYCLEA ON/OFF |
| High-temperature protection |
¡¡ |
| Temperature factor |
¡À0.03%¡æ(0~50¡æ) |
| Start,rise and lock time |
200ms,100ms,30ms |
| Vibration resistance |
10~500Hz,2G 10min./1cycle,time60,minutes for each shaft |
| Resistance to pressure |
Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC |
| Insolationg resistance |
Input and output internal,input and enclosure,Output and enclosure:500VAC/100M Ohms |
| Operating temperature and humidity |
-10¡æ~+60¡æ£¬20%~90%RH |
| Store temperature and humidity |
-20¡æ~+85¡æ,10%~95%RH |
| Overall dimension |
199*98*38mm |
| Weight |
0.7Kgs |
| Safety standard |
Conform to requirement in UL1012 |
| EMC standard |
...... |
Note:1.The testing condition for the paramenter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity
¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5)
¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage.
¡¡¡¡ 5.Load stability test:The load is from 0% to 100% |
