Low price and high reliability
105¡æ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectiely
With short-circuit and owwerload protection
100% full-load burning test
Installed with EMI filter,minimum wave |
| |
Model
Performance |
S-100-3 |
S-100-5 |
S-100-7-5 |
S-100-12 |
S-100-15 |
S-100-24 |
S-100-27 |
S-100-48 |
DC output voltage |
3V |
5V |
7.5V |
12V |
15V |
24V |
27V |
48V |
Output voltage error(Note:2) |
¡À2% |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
Rated output current |
20A |
20A |
13.6A |
8.5A |
6.7A |
4.5A |
3.7A |
2A |
Output current rage |
0-20A |
0-20A |
0-13.6A |
0-8.5A |
0-6.7A |
0-4.5A |
0-3.7A |
0-2A |
Wave and noise(Note:3) |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
Inlet stability(Note:4) |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.3% |
¡À0.3% |
¡À0.2% |
¡À0.2% |
¡À0.2% |
Load stability(Note:5) |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.3% |
¡À0.3% |
¡À0.2% |
¡À0.2% |
¡À0.2% |
DC output power |
60W |
100W |
102W |
102W |
100.5W |
108W |
99.9W |
96W |
Efficiency |
70% |
78% |
80% |
81% |
81% |
84% |
84% |
84% |
Adjustable range for DC voltage |
2.85-3.3V |
4.75-5.5V |
6.75-8.25V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
26-32V |
43.2-52.8V |
Range for input votage |
85~132VAC,170~264VAC,47~63HZ,switch choice |
Input current |
2.4A/112V 1.2A/230V |
Impact current |
Cool-start current30A/115V 60A/230V |
Leakage current |
<1mA/240VAC |
Overload proctection |
105~150% |
150~200% |
105~150% |
TYPE RESET:RECYCLE AC ON/OFF |
Over-voltage protection |
¡¡ |
High-temperature protection |
¡¡ |
Temperature factor |
¡À0.03%¡æ(0~50¡æ) |
Start,rise and lock time |
200ms,80ms,20ms |
Vibration resistance |
10~500Hz,2G 10min./1cycle,time60,minutes for each shaft |
Resistance to pressure |
Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC |
Insolationg resistance |
Input and output internal,input and enclosure,Output and enclosure:0500VAC/100M Ohms |
Operating temperature and humidity |
-10¡æ~+60¡æ£¬20%~90%RH |
Store temperature and humidity |
-20¡æ~+85¡æ,10%~95%RH |
Overall dimension |
199*98*38mm |
Weight |
0.5Kgs |
Safety standard |
Conform to requirement in UL1012 |
EMC standard |
¡¡ |
Note:1.The testing condition for the paramenter above is :230VAC input,rated load, 25¡æ 70% RH.Humidity ¡¡¡¡ 2.Error.include the setting error,line stability and load stability.(Note:5) ¡¡¡¡ 3.Wave test:adopting A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. ¡¡¡¡ 4.Inlet voltage stability test:when is over load, the lowest voltage of inlet is up to the highest voltage. ¡¡¡¡ 5.Load stability test:The load is from 0% to 100% |